1, single page print
At the time of placement, the center (vertical middle line) spliced and left 6 millimeters of bleeding edge, that is, each side of each page had 3mm bleeding (the demand cut two knives).
Clarification: if you do not print pictures, shades or perfect shades of printed matter, you can make a copy of the 1 way, with a center knife.
2, the cover of the jigsaw
At the time of ordinary manufacturing, we have a habit of combining the cover together with the "tongue". This method is compared to the paper (a blank is not applied), but the pattern has a good continuity.
Another way is to cover the cover, and the "tongue" is done alone, making paper, but one more "batter", that is to scrape more glue (or more adhesive tape) at the time of work.
3. Packing box
Ordinary large boxes (beyond 8K) need not be imprinted and printed directly.
Here is a brief introduction to the small package of the jigsaw.
As far as possible, the most compactness of the task is to be done in the case of opening, but the packing box involves a lot of post process. Rolling box (cutting out the edge and pressing the crease line) is the most important. At this time, the requirement is not less than 3mm, which is not less than 3mm. Otherwise, it will be very difficult to affect the quality of the product. .
When you finish the make-up (endorsed by the customer), it is better to produce a big knife film to facilitate the printing of the knife.
4, a card like card
An ally who can type, copy, and act as a stab has such experience. One hand made 8 hand stabs on the paper, and then cut them out with a card cutter. In fact, it is very difficult to do, my experience is a thorn paper can do 10 printers, do not cut card machine, if the number is small, you can use a ruler, knife, if the number is very large, it is very convenient to use the printing machine, and very economical. If you only do one or two boxes of hand stabs, which are colourful, and you have a cover to do, you can apply the blank of the envelope.